This product is a low foam carpet cleaner that provides deep cleaning of carpet and woven furniture by jetting/rinsing. Also be used by overing the water to remove water-soluble stains.
Mild pollution:500ml per 10 liter water (5%)
Heavy pollution: 1 liter per 10 liter water (10%)
Jet extraction method: Vacuum the carpet and remove spots/stains. Dilute the product at the recommended dilution and pre-spray the carpet. Each pre-spray area is controlled to approximately 40-50 square meters for approximately 10 minutes (without allowing the pre-spray area to become dry).Rinse the carpet with a suitable carpet extractor and water. (If the foam is too much, use a concentrated defoamer--TN-2.) Use a carpet brush to comb the fibers while the carpet is still damp.
Partial stains over water method: Vacuum the carpet and remove spots/stains, pre-wet with clear water around the stains, pour the undiluted product on the stain for a short time, then use clean water and immediately absorb water.